If you set the auto setting in the air-conditioning thermostat, the blower fan runs only when the whole unit works and if you set the thermostat to the ‘on’ setting, then the fan works continuously even when the unit is off. Do not think that continuously running blower provides more comfort than that blower which runs automatically. After reading this blog of the AC repair Miami Gardens, you will be able to know the benefits of the ‘auto’ setting of the air conditioning fan.
There are mainly four reasons that you shouldn’t set your thermostat to the ‘on’ setting and use the ‘auto’ setting.
It Causes High Electricity Bills: When the blower fan is set to on, it runs continuously and thus, it directly affects the power consumption of the air conditioner. Logically, you would not like to pay a high amount of money as electricity bill so, set it to auto so that the fan shall run only when your air conditioner work.
It Increases the Expense of Repairing: More work means more chances of the problem and then, the service of the AC repair Miami Gardens will be needed more. Do you know that the frequent repairing doesn’t only increase your expenses, but it also affects the lifespan and the efficiency of your air conditioning unit?
It Affects the Humidity Level of Your Home: It is the responsibility of an air conditioner to diminish the humidity level of your home, but if the blower of the AC runs all the time, then there are several chances that the humidity will not be controlled properly. If the fan is blowing air regularly, then it blows back the moisture into your room and the humidity level is increased.
Air Filters Become Dirty Too Early: In the air conditioner, an air filter is one of the most fragile units and should be replaced at the regular intervals. Yes, it is normal if the filters are becoming dirty because this means that they are working properly. But if the blower fan is working without a break, then you will need to replace the air filters more frequently.